I run my BBS on Linux with a simple GUI environment (Xfce), and I
have a VNC server running on it using x11vnc. Sometimes I VNC to it
to use it remotely from my main PC at home. Before moving, it was
fast and responsive (and I have a gigabit network at home, with my
PCs plugged in via ethernet). Recently I moved to a new place; my
devices are still plugged in via ethernet here, and I've noticed that
when I VNC to my BBS PC, there's now a lag. It displays quickly, but
with any interaction I have with it (typing, mouse clicks, moving a
window, etc.) there's a noticeable lag/delay. I haven't changed any configuration options. It seems odd to me. I've looked up what I
could change as far as the VNC server - I found some options for it
to enable some caching, which I think helped, though when I
connected, the view was smaller and it wouldn't fill the whole client
I was using.
I've considered setting up a different remote desktop solution - I've
heard VNC isn't the most optimized, and I suppose a different
solution would be okay, as long as I can connect easily (I'd like to
be able to connect from a Linux or Windows PC). It just seems odd
that it was fine before moving and has the lag now.
One difference is that in my last apartment, I had a long network
cable going through the apartment connecting my fiber internet ONT
(in the main bedroom closet) to my router in the 2nd bedroom, which I
was using as an office; my new apartment has ethernet ports wired in
each room, and I've connected my router and devices that way.
I don't suppose you have a traceroute from your old place to your BBS that you can compare to your new place? It could be taking a less efficient route, but I think you're right about VNC not being the greatest. For me,
I don't bother with a remote desktop for Linux, I just create an ssh tunnel to my BBS server and run vcxsrv on my Windows PC. Then I can run scfg, echocfg, qtmonitor or whatever directly on the Windows desktop without having to deal with everything in a windowed environment.
A lot of people suggest nomachine but I've never tried it so I cannot really say.
Also, with vnc I guess it depends on which "flavor" you're using. I think TightVNC is supposed to be faster but that could have changed much since I last used it.
I'd heard about that, and I looked into it, though it looked like it requires you to sign up with an account with them; and they have a paid version for businesses and a free tier for personal use, but I'm a little leery of something that requires me to sign up with a user account with them.
I should probably look into that too. I've used TightVNC elsewhere, but I don't think the VNC server I'm using is TightVNC.
I'd heard about that, and I looked into it, though it looked like it
requires you to sign up with an account with them; and they have a paid
version for businesses and a free tier for personal use, but I'm a little
leery of something that requires me to sign up with a user account with
them.
You mean similar to your Plex pass? ;)
I should probably look into that too. I've used TightVNC elsewhere, but I
don't think the VNC server I'm using is TightVNC.
Is it only in a GUI environment you're experiencing this? Or do you have these same issues when just simply connecting via ssh?
Wait, is your BBS at home or on a VPS somewhere outside?
responsive (and I have a gigabit network at home, with my PCs plugged in
via ethernet). Recently I moved to a new place; my devices are still
Are both devices plugged in with an ethernet cable, or into ethernet cabling in the walls? I'd check to see if you're getting gig ethernet, or if it's auto-negoatiating down to 100 mbps due to a bad cable?
Apparently, there are RDP servers for Linux. Don't know if they're any better than VNC or meant for sites where people admin from Windows PCs and want to do everything through RDP...
I would definitely check to see if you're getting gig ethernet through the house cabling. I'm assuming you have a patch panel somewhere where all of the ports are plugged into the router/switch? If you have access to the cables, you might want to check and see if they're Cat5, Cat6, or some variation.
computers, and it looks good. The speedtest result on my BBS computer happened to be a bit slower at the time I did the test, but it was more than 100 megabit. The speedtest result on my main PC was closer to gigabit and is what I was seeing at my previous apartment.
How much "more than 100 megabit"? That's a pretty significant difference in comparison to 1 gigabit. I usually get about 900-950mb/s at speedtest.net with my gigabit plan.
Did you mention in a previous message you're using multiple switches? Are you able to consolidate down to one maybe? Wall to modem, modem to router, router to switch, switch to everything else in the apartment?
My thought was if there is wall cabling between the two PCs that the cabling might not support gigabit ethernet and be forcing the computers to communicate at 100 mbps instead of gigabit.
Switches are getting cheap nowadays. I upgraded a dumb 8-port switch a while ago and found a TP-Link 8 port managed gigabit switch for under $40. I wanted something VLAN-aware if/when I start playing with those on my network.
So the way I have it set up is, my router is plugged into the fiber ONT, then I have Ethernet cables connecting the router to the wall ports. Then in my computer room, I have an 8-port switch which my main computer and
now BBS computer are both connected to. I have a 4-port switch closer to
my BBS PC connected to the first switch with a couple other devixes on it (VOIP adapter for my modem, and a network TV tuner).
Switches are getting cheap nowadays. I upgraded a dumb 8-port switch a while ago and found a TP-Link 8 port managed gigabit switch for under
$40. I wanted something VLAN-aware if/when I start playing with those on my network.
Hey poindexter!
On Thu, Nov 19 2026 07:24:54 -0800, you wrote:
Switches are getting cheap nowadays. I upgraded a dumb 8-port switch
a while ago and found a TP-Link 8 port managed gigabit switch for
under $40. I wanted something VLAN-aware if/when I start playing
with those on my network.
Yep, and made cheaper too. Almost like one could /say/ it's a gigabit switch, but the fastest speeds you see from it are 600mbps.
Regards, Accession
... Be kind to your kids, they'll be choosing your nursing home.
Makes me wonder if you're losing a decent amount of speed between the switches.
Re: Re: VNC lag on local network after moving
By: Accession to poindexter FORTRAN on Thu Nov 19 2026 06:59 pm
Hey poindexter!
On Thu, Nov 19 2026 07:24:54 -0800, you wrote:
Switches are getting cheap nowadays. I upgraded a dumb 8-port switch a while ago and found a TP-Link 8 port managed gigabit switch for under $40. I wanted something VLAN-aware if/when I start playing wit those on my network.
Yep, and made cheaper too. Almost like one could /say/ it's a gigabit switch, but the fastest speeds you see from it are 600mbps.
Regards, Accession
... Be kind to your kids, they'll be choosing your nursing home.
I'm wondering if the switch wasn't it after all.. After I moved my BBS PC to the first switch, I had rebooted it (for other reasons); its VNC was faster at first but after a while I noticed it had a lag again (though speedtest.net still shows better speeds on the first switch).
I've found that there are command-line switches that can optimize the VNC server I'm using, which helps. There's a weird issue right now where it's showing 2 taskbars, but I'll work on fixing that..
I'm wondering if the switch wasn't it after all.. After I moved my BBS PC
to the first switch, I had rebooted it (for other reasons); its VNC was
faster at first but after a while I noticed it had a lag again (though
speedtest.net still shows better speeds on the first switch).
How much memory do you have on the server that you're VNC'ing into?
How much memory gets used when VNC'ing into a GUI desktop environment?
| Sysop: | jeronthenet23 |
|---|---|
| Location: | Georgetown, CA |
| Users: | 2 |
| Nodes: | 4 (1 / 3) |
| Uptime: | 00:23:05 |
| Calls: | 0 |
| Messages: | 2,984 |