Nightfox wrote to All <=-
responsive (and I have a gigabit network at home, with my PCs plugged
in via ethernet). Recently I moved to a new place; my devices are still plugged in via ethernet here, and I've noticed that when I VNC to my
BBS PC, there's now a lag.
Are both devices plugged in with an ethernet cable, or into ethernet
cabling in the walls? I'd check to see if you're getting gig ethernet,
or if it's auto-negoatiating down to 100 mbps due to a bad cable?
I've considered setting up a different remote desktop solution - I've heard VNC isn't the most optimized, and I suppose a different solution would be okay, as long as I can connect easily (I'd like to be able to connect from a Linux or Windows PC). It just seems odd that it was
fine before moving and has the lag now.
Apparently, there are RDP servers for Linux. Don't know if they're any
better than VNC or meant for sites where people admin from Windows PCs
and want to do everything through RDP...
going through the apartment connecting my fiber internet ONT (in the
main bedroom closet) to my router in the 2nd bedroom, which I was using
as an office; my new apartment has ethernet ports wired in each room,
and I've connected my router and devices that way.
I would definitely check to see if you're getting gig ethernet through
the house cabling. I'm assuming you have a patch panel somewhere where
all of the ports are plugged into the router/switch? If you have access
to the cables, you might want to check and see if they're Cat5, Cat6,
or some variation.
--- MultiMail/Win v0.52
þ Synchronet þ .: realitycheckbbs.org :: scientia potentia est :.